GW Instek GDS-2000A series Programming Manual - Manual (Page 217)

COMMAND DETAILS
217
:SEARCH:TRIGger:BUS:B1:CAN:DATa:SIZe
Description Sets or returns the length of the data string in bytes
for the CAN search trigger.
Note: Only applicable when the condition is set to
DATA or IDANDDATA.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :SEARCH:TRIGger:BUS:B1:CAN:DATa:SIZe {|?}
Parameter/
Return parameter 1~8 (bytes)
Example :SEARCH:TRIGger:BUS:B1:CAN:DATa:SIZe?
>1
:SEARCH:TRIGger:BUS:B1:CAN:DATa:SIZe 2
:SEARCH:TRIGger:BUS:B1:CAN:DATa:SIZe?
>2
:SEARCH:TRIGger:BUS:B1:CAN:DATa:
VALue
Description Sets or returns the binary data string to be used for
the CAN search trigger.
Note: Only applicable when the condition is set to
DATA or IDANDDATA.
Related
Commands :SEARCH:TRIGger:BUS:B1:CAN:DATa:SIZe
Syntax :SEARCH:TRIGger:BUS:B1:CAN:DATa:VALue
{|?}
Parameter/
Return parameter The size of the string depends on the
data size setting. The string must be
enclosed in double quotes, “string”.
Set
Query
Set
Query