GW Instek GDS-2000A series Programming Manual - Manual (Page 247)

COMMAND DETAILS
247
:SEGMents:SAVe:SELect:STARt
Description Sets or queries the starting segment to save from.
Syntax :SEGMents:SAVe:SELect:STARt
{SETTOMIN | SETTOMAX | | ? }
Related
commands :SEGMents:TOTalnum
Parameter/
Return parameter SETTOMIN Sets the starting segment to min
segment.
SETTOMAX Sets the starting segment to the max
segment.
Sets the segment to 1~2048.
Example :SEGMents:SAVe:SELect:STARt 2
Sets the starting segment to segment number 2.
:SEGMents:SAVe:SELect:END
Description Sets or queries the ending segment to save from.
Syntax :SEGMents:SAVe:SELect:END
{SETTOMIN | SETTOMAX | | ? }
Related
commands :SEGMents:TOTalnum
Parameter/
Return parameter SETTOMIN Sets the starting segment to min
segment.
SETTOMAX Sets the starting segment to the max
segment.
Sets the segment to 1~2048.
Example :SEGMents:SAVe:SELect:END 10
Sets the ending segment to segment number 10.
Set
Query
Set
Query