GW Instek GDS-2000A series Programming Manual - Manual (Page 7)

INTERFACE OVERVIEW
7
Configure RS-232C Interface
RS-232C
Configuration Connector DB-9, Male
Baud rate 2400, 4800, 9600, 19200, 38400,
57600, 115200
Parity None, Odd, Even
Data bit 8 (fixed)
Stop bit 1, 2
Panel Operation 1. Press the Utility key.
Utility
2. Press I/O from the bottom menu.
3. Press RS-232C from the side menu.
4. Use the side menu to set the Baud
Rate.
Baud Rate 2400, 4800, 9600, 19200, 38400,
57600, 115200
5. Press Stop Bit to toggle the number
of stop bits.
Stop Bits 1, 2
6. Press Parity to toggle the parity.
Parity Odd, Even, None