GW Instek GDS-2000A series Programming Manual - Manual (Page 202)

GDS-2000A Programming Manual
202
Related
commands :SEARCH:TRIGger:BUS:B1:I2C:CONDition
Parameter ADDR7 7 bit addressing
ADDR10 10 bit addressing
Return Parameter 0 7 bit addressing
1 10 bit addressing
Example :SEARCH:TRIGger:BUS:B1:I2C:ADDRess:MODe?
0
The addressing mode is current set to 7 bits.
:SEARCH:TRIGger:BUS:B1:I2C:ADDRess:TY
Pe
Description Sets the I 2 C bus address type, or queries what the
setting is for the search trigger.
Syntax :SEARCH:TRIGger:BUS:B1:I2C:ADDRess:TYPe
{GENeralcall | STARtbyte | HSmode | EEPROM | CBUS
| ?}
Related
commands :SEARCH:TRIGger:BUS:B1:I2C:CONDition
Parameter GENeralcall Set a general call address (0000 000 0).
STARtbyte Set a start byte address. (0000 000 1)
HSmode Set a high-speed mode address.
(0000 1xx x)
EEPROM Set an EEPROM address.
(1010 xxx x)
CBUS Set a CBUS address. (0000 001 x)
Return Parameter Returns the address type
Example :SEARCH:TRIGger:BUS:B1:I2C:ADDRess:TYPe?
CBUS
Set
Query