GW Instek GDS-2000A series Programming Manual - Manual (Page 162)

GDS-2000A Programming Manual
162
:RECAll:WAVEform
Description Recalls a waveform from wave1~wave20 or from
file to REF1~4.
Note Only *.LSF files can be recalled using this
command. *.CSV files cannot be recalled.
Syntax :RECAll:WAVEform{W |
(“Disk:/xxx.LSF”,”USB:/xxx.LSF”)},REF
Parameter n 1~20 (Wave1~wave20)
xxx.LSF Filename in file path.
1,2,3,4 (REF1, REF2, REF3, REF4)
Example :RECAll:WAVEform W1, REF1
Recalls the waveform stored in Wave1 to reference
1.
:SAVe:IMAGe
Description Saves a screen image to the assigned file path with
a specified filename.
Syntax :SAVe:IMAGe { (“Disk:/xxx.PNG”,
“USB:/xxx.BMP)}
Related
commands :SAVe:IMAGe:FILEFormat
:SAVe:IMAGe:INKSaver
Parameter xxx.PNG or
xxx.BMP File name (8 characters max)
Example :SAVe:IMAGe “Disk:/pic1.PNG”
Saves a screen image named pic1.png to the root
directory (Disk:/) of the scope.
:SAVe:IMAGe “USB:/pic1.BMP”
Saves a screen image named pic1.bmp to the root
directory of the external USB flash disk.
Set
Set