GW Instek GDS-2000A series Programming Manual - Manual (Page 180)

GDS-2000A Programming Manual
180
:BUS1:CAN:SOURce
Description Sets or returns the CAN input source.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :BUS1:CAN:SOURce
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13
|D14|D15| ? }
Parameter/Return
parameter D0 ~ D15 Digital channel source.
Example :BUS1:CAN:SOURCE?
>D0
Returns the CAN source.
:BUS1:CAN:PROBe
Description Sets or returns the signal type of the CAN bus.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :BUS1:CAN:PROBe {CANH|CANL|TX|RX| ? }
Parameter/Return
parameter CANH CAN-High
CANL CAN-Low
TX Transmit
RX Receive
Example :BUS1:CAN:PROBe?
>CANH
:BUS1:CAN:PROBe CANL
:BUS1:CAN:PROBe?
>CANL
Set
Query
Set
Query