GW Instek GDS-2000A series Programming Manual - Manual (Page 104)

GDS-2000A Programming Manual
104
Return parameter CH1 to CH4 Channel 1, 2, 3, 4
MATH Math source
D0 to D15 Digital channel sources D0 to D15
Example :MEASUrement:MEAS1:SOURCE1
CH1
Returns the (first) source for measurement 1.
:MEASUrement:MEAS:TYPe
Description Sets or queries the measurement type for a selected
automatic measurement. This is a statistics related
command.
Syntax :MEASUrement:MEAS:TYPe
{PK2pk | MAXimum | MINImum | AMPlitude | HIGH |
LOW | MEAN | CMEan | RMS | CRMs | AREa | CARea |
ROVShoot | FOVShoot | RPReshoot | FPReshoot |
FREQuency | PERIod | RISe | FALL | PWIdth | NWIdth |
PDUTy | PPULSE | NPULSE | PEDGE | NEDGE
| FRRDelay | FRFDelay | FFRDelay | FFFDelay |
LRRDelay | LRFDelay | LFRDelay | LFFDelay | PHAse
| ?}
Related
commands :MEASUrement:MEAS:SOURCE
Parameter MEAS The automatic measurement number
from 1 to 8.
Return parameter Returns the measurement type
Example :MEASUrement:MEAS1:TYPe RMS
Sets measurement 1 to RMS measurement.
:MEASUrement:MEAS:STATE
Description Sets or queries the state of a selected measurement.
This is a statistics related command.
Set
Query
Set
Query