GW Instek GDS-2000A series Programming Manual - Manual (Page 123)

COMMAND DETAILS
123
Example :TRIGger:MODe NORMal
Sets the trigger mode to normal.
:TRIGger:HOLDoff
Description Sets or queries the holdoff time.
Syntax :TRIGger:HOLDoff { | ?}
Parameter Holdoff time
Return parameter Returns the trigger holdoff time.
Example :TRIGger:HOLDoff 1.00E-8
Sets the trigger holdoff time to 10ns.
:TRIGger:LEVel
Description Sets or queries the level.
Syntax :TRIGger:LEVel {TTL | ECL | SETTO50 | | ?}
Related
commands :TRIGger:TYPe
Parameter Trigger level value
TTL Sets the trigger level to TTL.
ECL Sets the trigger level to ECL.
SETTO50 Sets the trigger level to the User level
(50% by default).
Return parameter Returns the trigger level.
Example1 :TRIGger:LEVel TTL
Sets the trigger to TTL.
Example2 :TRIGger:LEVel 3.30E-1
Sets the trigger level to 330mV/mA.
:TRIGger:HLEVel
Set
Query
Set
Query
Set
Query