GW Instek GDS-2000A series Programming Manual - Manual (Page 108)

GDS-2000A Programming Manual
108
Example :MEASUrement:MEAS3:SOUrce1 CH1
:MEASUrement:MEAS3:TYPe PK2PK
:MEASUrement:MEAS3:STATE ON
:MEASUrement:STATIstics:MODe ON
:MEASUrement:MEAS3:MINImum?
1.600E-02
Returns the minimum measurement result for
measurement number 3.
:MEASUrement:MEAS:STDdev
Description Returns the standard deviation for the selected
measurement from the last time the statistics were
reset. This is a statistics related command.
Syntax :MEASUrement:MEAS:STDdev?
Related
Commands :MEASUrement:STATIstics:MODe
Parameter MEAS The automatic measurement number
from 1 to 8.
Example :MEASUrement:MEAS3:SOUrce1 CH1
:MEASUrement:MEAS3:TYPe PK2PK
:MEASUrement:MEAS3:STATE ON
:MEASUrement:STATIstics:MODe ON
:MEASUrement:MEAS3:STDdev?
1.530E-03
Returns the standard deviation for measurement
number 3.
:MEASUrement:STATIstics:MODe
Description Puts the statics measurement results on the display
or queries whether the statics are displayed.
Syntax :MEASUrement:STATIstics:MODe {OFF | ON | ?}
Query
Set
Query