GW Instek GDS-2000A series Programming Manual - Manual (Page 69)

COMMAND DETAILS
69
Return Parameter Returns the difference between two
vertical cursors.
Example :CURSor:VDELta?
4.00E+0
Returns the vertical delta as 4 volts.
:CURSor:XY:RECTangular:X:POSition
Description Sets or queries the horizontal position in XY mode
for the X rectangular coordinates for cursor 1 or 2.
Syntax :CURSor:XY:RECTangular:X:POSition {NRf|?}
Parameter Cursor 1, 2
Horizontal position co-ordinates
Return parameter Returns the cursor position.
Example :CURSor:XY:RECTangular:X:POSition1 4.0E-3
Sets the X-coordinate cursor 1 position to
40mV/mV.
:CURSor:XY:RECTangular:X:DELta
Description Returns the delta value of cursor 1 and 2 on the X
coordinate.
Syntax :CURSor:XY:RECTangular:X:DELta {?}
Return Parameter Returns the delta value of cursor 1 and 2
as .
Example : CURSor:XY:RECTangular:X:DELta?
80.0E-3
Returns the horizontal delta as 80mV.
Set
Query
Query