GW Instek GDS-2000A series Programming Manual - Manual (Page 165)

COMMAND DETAILS
165
Example 3 :SAVe:WAVEform:FILEFormat FCSV
:SAVe:WAVEform ALL, “Disk:/ALL002”
Sets the file format to FCSV(fast CSV format). It
then saves the all channel’s waveforms to the root
directory (Disk:/) of the internal flash disk in the
CSV format (with the filename ALL002.CSV).
Example 4 :SAVe:WAVEform:FILEFormat LSF
:SAVe:WAVEform CH2, “Disk:/DS0003.LSF”
Save the channel 2’s waveform to the root
directory (Disk:/) of the internal flash disk in the
LSF format with DS0003.LSF as the filename.
Note: Only LSF file format can be recalled by scope
using remote commands.
:SAVe:WAVEform:FILEFormat
Description Sets the waveform savefile format.
Syntax :SAVe:WAVEform:FILEFormat {LSF | DCSV | FCSV |
LMDCSV | LMFCSV | ?}
Parameter LSF Sets the file format to the GDS 2000A’s
internal file format, LSF. (xxx.LSF)(no
support LA)
DCSV Sets the file format to detail CSV.
(xxx.CSV)
FCSV Sets the file format to fast CSV.
(xxx.CSV)
LMDCSV Sets the file format to LM detail CSV.
(xxx.CSV)
LMFCSV Sets the file format to LM fast CSV.
(xxx.CSV)
Return parameter Returns the file format (LSF , DCSV, FCSV ,
LMDCSV,LMFCSV ).
Set
Query