GW Instek GDS-2000A series Programming Manual - Manual (Page 127)

COMMAND DETAILS
127
:TRIGger:DELay:LEVel
Description Sets or queries the trigger delay level.
Syntax :TRIGger:DELay:LEVel { | ?}
Parameter Delay trigger level
Return parameter Returns the delay trigger.
Example :TRIGger:DELay:LEVel 5.00E-3
Sets the delay trigger to 5mV/mA.
:TRIGger:PULSEWidth:POLarity
Description Sets or queries the pulse width trigger polarity.
Syntax :TRIGger:PULSEWidth:POLarity
{POSitive | NEGative | ?}
Related
commands :TRIGger:TYPe
Parameter POSitive Positive polarity
NEGative Negative polarity
Return parameter Returns the pulse width polarity.
Example :TRIGger:PULSEWidth:POLarity POSitive
Sets the pulse width polarity to positive.
:TRIGger:RUNT:POLarity
Description Sets or queries the Pulse Runt trigger polarity.
Syntax :TRIGger:RUNT:POLarity { POSitive | NEGative |
EITher | ? }
Related
commands :TRIGger:TYPe
Parameter POSitive Positive polarity
Set
Query
Set
Query
Set
Query