GW Instek GDS-2000A series Programming Manual - Manual (Page 234)

GDS-2000A Programming Manual
234
Example2 :BUS1:LABel?
Bus
:BUS1:LABel:DISPlay
Description Turns the label on/off for the bus or returns its
status.
Syntax :BUS1:LABel:DISPlay { OFF | ON | ? }
Related
commands :BUS1:LABel
Parameter OFF Turns the file label off for the bus.
ON Turns the file label on for the bus.
Return parameter Returns the status of the file label for the bus (ON,
OFF).
Example :BUS1:LABel "Bus"
:BUS1:LABel:DISPlay ON
:BUS1:LABel:DISPlay?
ON
Sets the label for the bus to "Bus" and then turns
the label display on. The query return shows that
the label is on.
:D:LABel
Description Sets or returns the waveform label for the selected
digital channel.
Syntax :D:LABel { | ?}
Related
commands :D:LABel:DISPlay
Set
Query
Set
Query