GW Instek GDS-2000A series Programming Manual - Manual (Page 115)

COMMAND DETAILS
115
Timebase Commands
:TIMebase:EXPand ....................................................115
:TIMebase:POSition ..................................................115
:TIMebase:SCALe .......................................................116
:TIMebase:MODe ......................................................116
:TIMebase:WINDow:POSition ..................................116
:TIMebase:WINDow:SCALe ......................................117
:TIMebase:EXPand
Description Sets or queries the horizontal expansion mode.
Only available for firmware V1.18 or above.
Note Requires the Horizontal Expansion app. Available
for download on the GW Instek website.
Syntax :TIMebase:EXPand {CENTer|TRIGger|?}
Parameter/Return
parameter CENTer Expand from the center of the
display.
TRIGger Expand from the trigger point.
Example :TIMebase:EXPand TRIGger
Sets the expansion point to the trigger point.
:TIMebase:POSition
Description Sets or queries the horizontal position.
Syntax :TIMebase:POSition { | ?}
Parameter Horizontal position
Return parameter Returns the horizontal position.
Example :TIMebase:POSition 5.00E-4
Sets the horizontal position as 500us.
Set
Query
Set
Query