GW Instek GDS-2000A series Programming Manual - Manual (Page 49)

COMMAND DETAILS
49
Vertical Commands
:CHANnel:BWLimit .............................................. 49
:CHANnel:COUPling ............................................ 50
:CHANnel:DESKew .............................................. 50
:CHANnel:DISPlay ............................................... 50
:CHANnel:EXPand ................................................51
:CHANnel:IMPedance? .........................................51
:CHANnel:INVert ................................................. 52
:CHANnel:POSition ............................................. 52
:CHANnel:PROBe:RATio ..................................... 53
:CHANnel:PROBe:TYPe ....................................... 53
:CHANnel:SCALe ................................................. 53
:CHANnel:BWLimit
Description Sets or returns the bandwidth limit on/off.
Syntax :CHANnel:BWLimit {FULL | | ?}
Parameter Channel 1,2,3,4
FULL Full bandwidth
Sets the bandwidth limit to a pre-defined
bandwidth.
200E+6: 200MHz
100E+6: 100MHz
20E+6: 20MHz
Return Parameter Returns the bandwidth.
Full Full bandwidth
Example :CHANnel1:BWLimit 2.000E+07
Sets the channel 1 bandwidth 20MHz
Set
Query