GW Instek GDS-2000A series Programming Manual - Manual (Page 109)

COMMAND DETAILS
109
Related
commands :MEASUrement:STATIstics
Parameter/
Return parameter ON Display the statistics on the screen.
OFF Remove the statistics from the screen
Example :MEASUrement:STATIstics:MODe ON
Displays statistics on the screen.
:MEASUrement:STATIstics:WEIghting
Description Sets and queries the number of samples used for
the statistics calculations.
Syntax :MEASUrement:STATIstics:WEIghting { | ? }
Parameter/
Return parameter Number of samples (2~1000)
Example :MEASUrement:STATIstics:WEIghting 5
Sets the number of samples to 5.
:MEASUrement:STATIstics
Description Resets the statics calculations. This command will
clear all the currently accumulated measurements.
Syntax :MEASUrement:STATIstics RESET
Set
Query
Set