Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) User Manual
Page 397

Multi-Service IronWare Administration Guide
379
53-1003028-02
Syslog messages
A
TABLE 86
Syslog messages LDP
Message level
Message
Explanation
Notification
MPLS LDP path vector limit mismatch for
session lsrId labelSpaceId (value local
vector limit) with peer lsrId labelSpaceId
(value peer vector limit)
This notification is generated when the
value of the LDP path vector limit value
from the peer does not match that of the
entity.
Notification
MPLS LDP entity session lsrId labelSpaceId
with peer lsrId labelSpaceId is up
This notification is sent when the value of
'mplsLdpSessionState' enters the
'operational(5)' state.
Notification
MPL LDP entity session lsrId labelSpaceId
with peer lsrId labelSpaceId is down
This notification is sent when the value of
'mplsLdpSessionState' leaves the
'operational(5)' state.
TABLE 87
Syslog messages DHCP
Message level
Message
Explanation
Warning
DHCPC: No DHCP service available on the
network.
The DHCPOFFER message is not received
within 16 seconds of starting the DHCP
address configuration phase.
Warning
DHCPC: Failed to renew DHCP lease on
port 1/1 with IP address 10.1.1.1 mask
255.255.255.0
The DHCP lease cannot be renewed.
Warning
DHCPC: Failed to configure IP address on
port 1/1; with IP address 10.1.1.1,mask
255.255.255.0
The IP address cannot be configured
without a reason.
Warning
Failed to download image file image name The image file cannot be downloaded.
Warning
DHCPC: Failed to download configuration
file image name
The configuration files cannot be
downloaded.
TABLE 88
Syslog messages DHCPv6
Message level
Message
Explanation
Warning
DHCPv6: Maximum allowed 60000
delegated prefixes learned.
The delegated prefixes’ limit has reached
the maximum value at the system level.
Warning
DHCPv6: Write to flash file to save
delegated prefixes information failed.
Saving the delegated prefixes to flash file
failed.
Warning
DHCPv6: Maximum allowed 20000
delegated prefixes learned on interface ve
100.
The delegated prefixes’ limit has reached
the maximum value at the interface level.
TABLE 89
Syslog messages NSR
Message level
Message
Explanation
Notification
NSR: Successfully notified RTM6 that
OSPF6 switchover complete
OSPFv3 completes the restart process after
switching over to the new master MP.