Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 379)

Multi-Service IronWare Administration Guide 361
53-1003028-02
Syslog messages
A
TABLE 73 Syslog messages OSPFv3
Message level Message Explanation
Alert OSPFv3 Memory Overflow OSPF has run out of memory.
Alert OSPFv3 LSA Overflow, LSA Type =
lsa-type Indicates an LSA database overflow.
The lsa-type parameter indicates the type of LSA that
experienced the overflow condition. The LSA type is one of
the following:
•
1 – Router
•
2 – Network
•
3 – Summary
•
4 – Summary
•
5 – External
Notification OSPFv3 interface state changed,
rid router-id, intf addr ip-addr,
state ospf-state Indicates that the state of an OSPF interface has changed.
The router-id is the router ID of the device.
The ip-addr is the interface’s IP address.
The ospf-state indicates the state to which the interface
has changed and can be one of the following:
•
down
•
loopback
•
waiting
•
point-to-point
•
designated router
•
backup designated router
•
other designated router
•
unknown
Notification OSPFv3 virtual intf state changed,
rid router-id, area area-id,
nbr ip-addr, state ospf-state Indicates that the state of an OSPF virtual routing interface
has changed.
The router-id is the router ID of the router the interface is
on.
The area-id is the area the interface is in.
The ip-addr is the IP address of the OSPF neighbor.
The ospf-state indicates the state to which the interface
has changed and can be one of the following:
•
down
•
loopback
•
waiting
•
point-to-point
•
designated router
•
backup designated router
•
other designated router
•
unknown