Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 383)

Multi-Service IronWare Administration Guide 365
53-1003028-02
Syslog messages
A
Notification OSPFv3 intf rcvd bad pkt, rid
router-id,
intf addr ip-addr,
pkt src addr src-ip-addr,
pkt type pkt-type Indicates that an OSPF interface received a bad packet.
The router-id is the router ID of the device.
The ip-addr is the IP address of the interface on the device.
The src-ip-addr is the IP address of the interface from
which the device received the authentication failure.
The packet-type can be one of the following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
Notification OSPFv3 virtual intf rcvd bad pkt,
rid router-id, intf addr ip-addr,
pkt src addr src-ip-addr,
pkt type pkt-type Indicates that an OSPF interface received a bad packet.
The router-id is the router ID of the device.
The ip-addr is the IP address of the interface on the device.
The src-ip-addr is the IP address of the interface from
which the device received the authentication failure.
The packet-type can be one of the following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
Notification OSPFv3 intf retransmit, rid
router-id,
intf addr ip-addr, nbr rid
nbr-router-id,
pkt type is pkt-type, LSA type
lsa-type,
LSA id lsa-id, LSA rid lsa-router-id An OSPF interface on the device has retransmitted a Link
State Advertisement (LSA).
The router-id is the router ID of the device.
The ip-addr is the IP address of the interface on the device.
The nbr-router-id is the router ID of the neighbor router.
The packet-type can be one of the following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
The lsa-type is the type of LSA.
The lsa-id is the LSA ID.
The lsa-router-id is the LSA router ID.
TABLE 73 Syslog messages OSPFv3
Message level Message Explanation