Displaying ipv6 vpn cam information, Show cam ipv6 – Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) User Manual
Page 340
322
Multi-Service IronWare Administration Guide
53-1003028-02
CAM partition profiles
9
Show CAM IPv6
To display IPv6 CAM information, enter the following command
Syntax: show cam ipv6 slot/port
The slot/port parameter specifies the port for which you want to display the CAM entries.
describes the output parameters of the show cam ipv6 slot/port command.
Displaying IPv6 VPN CAM information
The show cam ipv6-vpn command displays CAM information for an IPv6 VPN CAM entry on a single
port, or for all ports on a device. IPv6 VPN CAM contains the destination IPv6 VPN address and
layer 3 VPN ID. To display information for an IPv6 VPN CAM entry, enter the following command:
Syntax: show cam ipv6-vpn slot/port
TABLE 55
Output parameters of the show cam ipv6 command
Field
Description
LP
Shows the number of the interface module.
Index (Hex)
Shows the row number of this entry in the IP route table.
IPV6 Address
Shows the IPv6 address of the interface.
MAC
Shows the MAC address of the interface.
Age
Shows whether the age is enabled or disabled.
IFL/ VLAN
Shows the VLAN to which the port belongs.
Out IF
Shows the state of outgoing interface action.
PRAM (Hex)
Shows the ACL PRAM entries.
Brocade# show cam ipv6 3/20
LP Index IPV6 Address MAC Age IFL/ Out IF PRAM
(Hex) VLAN
(Hex)
3 22ffc
2001:db8::/128
N/A Dis N/A Mgmt
000dc
3 22ffe
2001:db8::1/128
N/A Dis N/A Mgmt
000db
3 2e8a6
2001:db8::/64
N/A Dis N/A CPU
000dd
3 2ffde
fe80::/10
N/A Dis N/A CPU
00086
3 2fffe
::/0
N/A Dis N/A Drop
00085
Brocade# show cam ipv6-vpn 1/1
LP Index IPV6 VPN Address MAC Age
(Hex) IFL ID Out IF PRAM
1 407f0 2001:db8:1::/128 N/A Dis
(21847 Filter 1d615)
1 407f2 2001:db8:2::/128 N/A Dis
(21846 Drop 5af6d)