Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 377)

Multi-Service IronWare Administration Guide 359
53-1003028-02
Syslog messages
A
Notification OSPF intf retransmit, rid router-id,
intf addr ip-addr, nbr rid nbr-router-id,
pkt type is pkt-type, LSA type lsa-type,
LSA id lsa-id, LSA rid lsa-router-id An OSPF interface on the device has
retransmitted a Link State Advertisement
(LSA).
The router-id is the router ID of the device.
The ip-addr is the IP address of the
interface on the device.
The nbr-router-id is the router ID of the
neighbor router.
The packet-type can be one of the following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
The lsa-type is the type of LSA.
The lsa-id is the LSA ID.
The lsa-router-id is the LSA router ID.
Notification OSPF virtual intf retransmit, rid router-id,
intf addr ip-addr, nbr rid nbr-router-id,
pkt type is pkt-type, LSA type lsa-type,
LSA id lsa-id, LSA rid lsa-router-id An OSPF interface on the device has
retransmitted a Link State Advertisement
(LSA).
The router-id is the router ID of the device.
The ip-addr is the IP address of the
interface on the device.
The nbr-router-id is the router ID of the
neighbor router.
The packet-type can be one of the following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
The lsa-type is the type of LSA.
The lsa-id is the LSA ID.
The lsa-router-id is the LSA router ID.
Notification OSPF originate LSA, rid router-id,
area area-id, LSA type lsa-type,
LSA id lsa-id,
LSA router id lsa-router-id An OSPF interface has originated an LSA.
The router-id is the router ID of the device.
The area-id is the OSPF area.
The lsa-type is the type of LSA.
The lsa-id is the LSA ID.
The lsa-router-id is the LSA router ID.
Notification OSPF max age LSA, rid router-id,
area area-id, LSA type lsa-type,
LSA id lsa-id, LSA rid lsa-router-id An LSA has reached its maximum age.
The router-id is the router ID of the device.
The area-id is the OSPF area.
The lsa-type is the type of LSA.
The lsa-id is the LSA ID.
The lsa-router-id is the LSA router ID.
TABLE 72 Syslog messages OSPF (Continued)
Message level Message Explanation