Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 378)

360 Multi-Service IronWare Administration Guide
53-1003028-02
Syslog messages
A
Notification OSPF LSDB overflow, rid router-id,
limit num A Link State Database Overflow (LSDB)
condition has occurred.
The router-id is the router ID of the device.
The num is the number of LSAs.
Notification OSPF LSDB approaching overflow,
rid router-id, limit num The software is close to an LSDB condition.
The router-id is the router ID of the device.
The num is the number of LSAs.
Notification OSPF intf rcvd bad pkt Bad Checksum, rid
ip-addr, intf addr ip-addr, pkt size num,
checksum num, pkt src addr ip-addr, pkt
type type The device received an OSPF packet that
had an invalid checksum.
The rid ip-addr is device’s router ID.
The intf addr ip-addr is the IP address of the
interface that received the packet.
The pkt size num is the number of bytes in
the packet.
The checksum num is the checksum value
for the packet.
The pkt src addr ip-addr is the IP address of
the neighbor that sent the packet.
The pkt type type is the OSPF packet type
and can be one of the following:
•
hello
•
database description
•
link state request
•
link state update
•
link state acknowledgement
•
unknown (indicates an invalid packet
type)
Notification OSPF intf rcvd bad pkt Bad Packet type, rid
ip-addr, intf addr ip-addr, pkt size num,
checksum num, pkt src addr ip-addr, pkt
type type The device received an OSPF packet with
an invalid type.
The parameters are the same as for the
Bad Checksum message. The pkt type type
value is “unknown”, indicating that the
packet type is invalid.
Notification OSPF intf rcvd bad pkt Unable to find
associated neighbor, rid ip-addr, intf addr
ip-addr, pkt size num, checksum num, pkt
src addr ip-addr, pkt type type The neighbor IP address in the packet is not
on the device’s list of OSPF neighbors.
The parameters are the same as for the
Bad Checksum message.
Notification OSPF intf rcvd bad pkt Invalid packet size,
rid ip-addr, intf addr ip-addr, pkt size num,
checksum num, pkt src addr ip-addr, pkt
type type The device received an OSPF packet with
an invalid packet size.
The parameters are the same as for the
Bad Checksum message.
TABLE 72 Syslog messages OSPF (Continued)
Message level Message Explanation