Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) User Manual
Page 317
Multi-Service IronWare Administration Guide
299
53-1003028-02
Basic NETCONF operations
8
To display the NETCONF session level statistics, enter the following command.
Syntax: show netconf sessions
describes the output of the show netconf sessions command.
TABLE 43
NETCONF server parameters
Field
Description
server status
The admin status (enabled or disabled) of the NETCONF server. Also displays the SSH
status, when SSH is not enabled.
Port
The NETCONF server port number.
Transport
The NETCONF transport (currently only SSH is supported).
Start Time
The time at which the NETCONF subsystem is started.
Max allowed sessions
The maximum number of simultaneous NETCONF sessions supported by the server.
Active sessions
The number of active NETCONF sessions.
Hello timeout
The NETCONF session hello message timeout in seconds.
Idle timeout
The NETCONF session idle message timeout in seconds.
In sessions
The number of sessions started.
In bad hellos
The number of sessions silently dropped because an invalid hello message was
received.
Dropped sessions
The number of sessions that were abnormally terminated (for example, due to transport
close).
In too big rpcs
The total number of RPC requests received by the server that are larger than the
supported maximum RPC request size.
In rpcs
The total number of correct RPC requests received by the server.
In bad rpcs
The total number of incorrect RPC messages received by the server. This includes XML
parse errors and errors on the RPC layer.
Out rpcs
The total number of RPC reply messages sent by the server containing an
element or element.
Out rpc errors
The total number of RPC reply messages sent by the server containing an
element.
Out too big rpcs
The total number of RPC reply messages sent by the server containing an
element with too-big as the error tag.
Brocade# show netconf session
Session Id: 1 SSH session Id: 1
Username: lab Login time: Feb 7 21:28:47
Client Ip Address: 10.120.73.112
Privilege Level:
Session Statistics:
In rpcs : 1 In bad rpcs : 0
Out rpcs : 1 Out rpc errors : 0
Edit-Config : 0 Get-Config : 0
Get : 1 Un-supported : 0