Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 261)

Multi-Service IronWare Administration Guide 243
53-1003028-02
One-way Delay Measurement
6
Monitor one-way delay daily for fixed interval of time
In this case, the one-way delay measurement can be configured to start daily at any fixed time and
stop after some period of time. The one-way delay will be calculated after receiving each one-way
delay measurement packet and delay statistics will be calculated for every measurement interval
configured. It can be viewed whenever required. This use case is useful whenever the administrator
wants to measure daily at particular time interval.
Configuration procedure
CFM Configuration for VLAN
VLAN Configuration
1. VLAN Creation.
Brocade(config)#vlan 20
Brocade(config-vlan-20)#tagged ethernet 1/1
Syntax: vlan id
CFM Configuration
1. Enabling CFM.
Brocade(config)#cfm-enable
Brocade(config-cfm)#
Syntax: cfm-enable
2. Domain Configuration
Brocade(config)#cfm-enable
Brocade(config-cfm)#domain-name md1 level 7
Brocade(config-cfm-md-md1)#
Syntax: domain-name md_name [id id] level level
3. MA Configuration
Brocade(config-cfm-md-md1)#ma-name ma1 vlan 20 priority 4
Brocade(config-cfm-md-md1-ma-ma1)
Syntax: ma-name ma_name [id id] vlan-id vlan | vpls-id vpls priority priority
4. MEP Configuration
Brocade(config-cfm-md-md1-ma-ma1)#mep 1 down port ethernet 1/1
Syntax: mep id {down | up} port ethernet slot/port
CFM Configuration for VPLS
Creation of VPLS
Brocade(config)#router mpls
Brocade(config-mpls)#vpls vpls100 100
Brocade(config-mpls-vpls-vpls100)#vlan 100
Brocade(config-mpls-vpls-vpls100-vlan-10)#tagged Ethernet 1/1