Show statistics ethernet – Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) User Manual
Page 102
84
Multi-Service IronWare Administration Guide
53-1003028-02
show statistics ethernet
2
show statistics ethernet
Displays statistics for an ethernet port.
Syntax
show statistics ethernet slot/port
Parameters
slot/port
Specifies the port that you want to display statistics for.
Command
Modes
User EXEC mode
Privileged EXEC mode
Global configuration mode
Usage
Guidelines
Command
Output
The show statistics ethernet command displays the following information:
Output field
Description
InOctets
The total number of good octets and bad octets received.
OutOctets
The total number of good octets and bad octets transmitted.
InPkts
The total number of packets received. The count includes rejected and local packets
that are not transmitted to the switching core for transmission.
OutPkts
The number of good packets received. The count includes unicast, multicast, and
broadcasts packets.
InBroadcastPkts
The total number of good broadcast packets received.
OutBroadcastPkts
The total number of good broadcast packets transmitted.
InMulticastPkts
The total number of good multicast packets received.
OutMulticastPkts
The total number of good multicast packets transmitted.
InUnicastPkts
The total number of good unicast packets received.
OutUnicastPkts
The total number of good unicast packets transmitted.
InDiscards
The total number of packets that were received and then dropped due to a lack of
receive buffers.
OutDiscards
The total number of packets that were transmitted and then dropped due to a lack of
transmit buffers.
InErrors
The total number of packets received that had Alignment errors or phy errors.
OutErrors
The total number of packets transmitted that had Alignment errors or phy errors.
InCollisions
The total number of packets received in which a Collision event was detected.
OutCollisions
The total number of packets transmitted in which a Collision event was detected.
OutLateCollisions
The total number of packets transmitted in which a Collision event was detected, but
for which a receive error (Rx Error) event was not detected.
Alignment
The total number of packets received that were from 64 – 1518 octets long, but had
either a bad FCS with an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).
FCS
The Frame Checksum error.