Viewing configuration information, Viewing 100g interface card license information – Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) User Manual
Page 116
98
Multi-Service IronWare Administration Guide
53-1003028-02
Basic management
4
Viewing configuration information
You can view a variety of configuration details and statistics with the show option. The show option
provides a convenient way to check configuration changes before saving them to flash.
The show options available will vary for the device and by configuration level.
To determine the available show commands for the system or a specific level of the CLI, enter the
following command.
Brocade# show ?
Syntax: show option
You also can enter “show” at the command prompt, then press the TAB key.
Viewing 100G interface card license information
You can check the number of licensed ports on the 100G card using the show version command.
Brocade# show version slot 3
The following example shows the output from a system with a 2-port license.
==========================================================================
SL 3: BR-MLX-100Gx2-X 2-port 100GbE Module (Serial #: BQS0528G0C1, Part #:
60-1001928-12)
License: MLXe_2PORT_100G (LID: dsuFKHNiFeG)
Boot : Version 5.6.0T175 Copyright (c) 1996-2013 Brocade Communications
Systems, Inc.
Compiled on Sep 19 2013 at 00:02:52 labeled as xmlprm05600b1
(423520 bytes) from boot flash
Monitor : Version 5.6.0T175 Copyright (c) 1996-2013 Brocade Communications
Systems, Inc.
Compiled on Sep 18 2013 at 23:34:48 labeled as xmlb05600b1
(539062 bytes) from code flash
IronWare : Version 5.6.0T177 Copyright (c) 1996-2013 Brocade Communications
Systems, Inc.
Compiled on Aug 28 2013 at 13:59:54 labeled as xmlp05600b327
(7477033 bytes) from Primary
FPGA versions:
Valid XPP Version = 6.04, Build Time = 8/27/2013 16:56:00
X10G2MAC 0
1333 MHz MPC 8541 (version 8021/0022) 533 MHz bus
512 KB Boot Flash (MX29LV040C), 64 MB Code Flash (MT28F256J3)
2048 MB DRAM, 8 KB SRAM, 286331153 Bytes BRAM
2 Port License
LP Slot 3 uptime is 2 days 23 hours 31 minutes 36 seconds
==========================================================================
All show version done
The following example shows the output from a system with a 1-port license.
==========================================================================
SL 3: BR-MLX-100Gx2-X 2-port 100GbE Module (Serial #: BQS0528G0C1, Part #:
60-1001928-12)
License: MLXe_1PORT_100G (LID: dsuFKHNiFeG)
Boot : Version 5.6.0T175 Copyright (c) 1996-2013 Brocade Communications
Systems, Inc.