Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 151)

Multi-Service IronWare Administration Guide 133
53-1003028-02
show sysmon config
5
show sysmon config
Displays the system monitoring configuration.
Syntax show sysmon config
Parameters None.
Command
Modes
User EXEC mode
Privileged EXEC mode
Global configuration mode
Usage
Guidelines
Command
Output
The show sysmon config command displays the following information:
Examples The following example displays the monitoring configuration.
Brocade# show sysmon config
---------------------------+----------------+-----------+----------+------------
EVENT | ACTION |POLL PERIOD|THERESHOLD|LOG BACK-OFF
| | (SEC) |#(PER POLL|
| | | in #POLL)|
---------------------------+----------------+-----------+----------+------------
TM. Link Monitoring |SHUTDOWN-LINK | 60 | 5 in 10 | 1800
---------------------------+----------------+-----------+----------+------------
Port CRC Monitoring |SYSLOG | 60 | 3 in 5 | 1800
---------------------------+----------------+-----------+----------+------------
FE. Link Monitoring |SHUTDOWN-LINK | 60 | 5 in 10 | 1800
---------------------------+----------------+-----------+----------+------------
NP Memory Error Monitoring |SYSLOG-AND-TRAP | 10 | N/A | N/A
---------------------------+----------------+-----------+ ---------+------------
History
Related
Commands
Output field Description
EVENT Error event that is monitored
ACTION Action taken when the error event is detected.
POLL PERIOD (SEC) Frequency of polling for the error event.
THRESHOLD The threshold at which the ACTION is taken.
LOG BACK-OFF Specifies the number of error events to skip before logging syslog messages again.
Syslog mesages are disabled for the specified number of error events.
Release Command History
Multi-Service IronWare R05.6.00 This command was enhanced to display the NP memory error monitoring event
configuration.