Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 155)

Multi-Service IronWare Administration Guide 137
53-1003028-02
sysmon port port-crc-test action
5
sysmon port port-crc-test action
Configures the diagnostic action for the port CRC error monitoring test.
Syntax sysmon port port-crc-test action {none|syslog|port-disable}
Command
Default
The default action for the port CRC error monitoring test is syslog.
Parameters none No action.
port-disable Disable port.
syslog Generate a syslog message.
Command
Modes
Global configuration mode
Usage
Guidelines
Examples The following example sets the diagnostic action to disable the port when the port CRC error limit
crosses the configured threshold.
Brocade(config)# sysmon port port-crc-test action port-disable
History
Related
Commands
sysmon port port-crc-test
Release Command History
Multi-Service IronWare R05.5.00 This command was introduced