Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 244)

226 Multi-Service IronWare Administration Guide
53-1003028-02
CFM monitoring for ISID
6
Sample Link MA configuration
The following sample configuration shows the Link Monitoring between DUT1 and DUT2. It also
shows the Link Monitoring between DUT2 and DUT3.
Brocade_DUT_1(config)#cfm-enable
Brocade_DUT_1(config-cfm)#domain-name d7 level 7
Brocade_DUT_1(config-cfm-md-d7)#ma-name link link-ma priority 7
Brocade_DUT_1(config-cfm-md-d7-ma-link)#ccm-interval 1-second
Brocade_DUT_1(config-cfm-md-d7-ma-link)#mep 1 down port eth 1/1
Brocade_DUT_2(config)#cfm-enable DUT_2(config-cfm)#domain-name d7 level 7
Brocade_DUT_2(config-cfm-md-d7)#ma-name link link-ma priority 7
Brocade_DUT_2(config-cfm-md-d7-ma-link)#ccm-interval 1-second
Brocade_DUT_2(config-cfm-md-d7-ma-link)#mep 3 down port eth 1/1
Brocade_DUT_2(config-cfm-md-d7-ma-link)#mep 4 down port eth 1/2
Brocade_DUT_3(config)#cfm-enable
Brocade_DUT_3(config-cfm)#domain-name d7 level 7
Brocade_DUT_3(config-cfm-md-d7)#ma-name link link-ma priority 7
Brocade_DUT_3(config-cfm-md-d7-ma-link)#ccm-interval 1-second
Brocade_DUT_3(config-cfm-md-d7-ma-link)#mep 2 down port eth 1/2
Show commands
The following show commands provide output for each component of the sample configuration.
Show cfm
Use the show cfm command to display the cfm configuration.
Syntax: show cfm
Brocade_DUT_1#show cfm
Domain: d7
Index: 1
Level: 7
Maintenance association: link
Ma Index: 1
CCM interval: 1000 ms
LINK MA ID: N/A
Priority: 7
ETH-AIS TX: DISABLED
ETH-AIS RX: DISABLED
ETH-AIS Interval: 10 sec
MEP Direction MAC PORT PORT-STATUS-TLV
==== ========= ========= ======== ===============
2 DOWN 0000.0011.86d1 ethe 1/1 N
Brocade_DUT_2#show cfm
Domain: d7
Index: 1
Level: 7
Maintenance association: link
Ma Index: 1
CCM interval: 1000 ms
LINK MA ID: N/A
Priority: 7
ETH-AIS TX: DISABLED