Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 339)

Multi-Service IronWare Administration Guide 321
53-1003028-02
CAM partition profiles
9
Show CAM IP
To display IP CAM information, enter the following command.
Syntax: show cam ip slot/port
The slot/port parameter specifies the port for which you want to display the CAM entries.
Table 54 describes the output parameters of the show cam ip slot/port command.
TABLE 54 Output parameters of the show cam ip command
Field Description
LP Shows the number of the interface module.
Index (Hex) Shows the row number of this entry in the IP route table.
IP Address Shows the IP address of the interface.
MAC Shows the MAC address of the interface.
Age Shows whether the age is enabled or disabled.
IFL/ VLAN Shows the VLAN to which the port belongs.
Out IF Shows the state of outgoing interface action.
PRAM (Hex) Shows the ACL PRAM entries.
Brocade# show cam ip 3/1
LP Index IP Address MAC Age IFL/ Out IF PRAM
(Hex) VLAN (Hex)
3 02fef(L) 10.33.32.0/32 N/A Dis N/A Drop 00094
3 02ff0(L) 10.33.32.255/32 N/A Dis N/A Mgmt 0009d
3 02ff1(L) 10.33.32.1/32 N/A Dis N/A Mgmt 0009c
3 02ff2(L) 10.11.11.0/32 N/A Dis N/A Drop 00094
3 02ff3(L) 10.11.11.255/32 N/A Dis N/A Mgmt 0009b
3 02ff4(L) 10.11.11.3/32 N/A Dis N/A Mgmt 0009a
3 02ff5(L) 10.5.5.5/32 N/A Dis N/A Mgmt 00096
3 02ff6(L) 224.0.0.22/32 N/A Dis N/A Mgmt 00093
3 02ff7(L) 224.0.0.18/32 N/A Dis N/A Mgmt 00092
3 02ff8(L) 224.0.0.13/32 N/A Dis N/A Mgmt 00091
3 02ff9(L) 224.0.0.9/32 N/A Dis N/A Mgmt 00090
3 02ffa(L) 224.0.0.6/32 N/A Dis N/A Mgmt 0008f
3 02ffb(L) 224.0.0.5/32 N/A Dis N/A Mgmt 0008e
3 02ffc(L) 224.0.0.4/32 N/A Dis N/A Mgmt 0008d
3 02ffd(L) 224.0.0.2/32 N/A Dis N/A Mgmt 0008c
3 02ffe(L) 224.0.0.1/32 N/A Dis N/A Mgmt 0008b
3 02fff(L) 10.255.255.255/32 N/A Dis N/A Mgmt 0008a
3 35488(R) 10.33.32.0/24 N/A Dis N/A CPU 0009f
3 35489(R) 10.11.11.0/24 N/A Dis N/A CPU 0009e
3 3548a(R) 10.5.5.5/32 N/A Dis N/A Drop 00094
3 3ffff(R) 0.0.0.0/0 N/A Dis N/A Drop 00094