beautypg.com

Expansion units, Expansion unit actions, Expansion unit automatic recovery – QNAP TVS-472XT 4-Bay NAS Enclosure User Manual

Page 97

background image

Depending on the model you may be asked to power off then power on the device, or disconnect then

reconnect the device.

QTS re-detects the device and displays a notification message.

3. Wait for confirmation that the firmware update has finished.

4. Go to Storage & Snapshots > Storage > Disks/VJBOD .

5. Click Recover, and then select Attach and Recover Storage Pool.

Expansion Units

Expansion units are designed to expand the storage capacity of a QNAP NAS by adding extra drive bays.

Expansion units can be connected to the NAS using USB, Mini-SAS, Thunderbolt, or other cable type.

Tip

Expansion units used to be known as JBODs.

Expansion Unit Actions

Go to Storage & Snapshots > Storage > Disks/VJBOD and select an expansion unit to perform one of the

following actions.

Action

Description

Enclosure Info

View full hardware details of the expansion unit,

including the model, serial number, firmware

version, BUS type, CPU temperature, system

temperature, power status, and fan speeds.

Action > Locate

Prompt the expansion unit chassis LEDs to blink, so

that you can locate the device in a server room or

rack.

Action > Safely Detach

Stop all activity and safely unmount the enclosure

from the host NAS.

Action > Update Firmware

Update the expansion unit's firmware.

Action > Rename Enclosure

Rename the selected expansion unit.

RAID Group

View details about each RAID group on the

expansion unit, including its RAID type, capacity, and

member disks.

Expansion Unit Automatic Recovery

If an expansion unit is accidentally disconnected from the NAS, for example by an unscheduled shutdown or

disconnected cable, then the following changes to storage state will occur:

• The status of all storage pools on the expansion unit will change to

Error

.

• The status of all RAID groups on the expansion unit will change to

Not Active

.

If you encounter this situation, reconnect the expansion unit to the NAS and QTS will automatically guide

you through the recovery process.

QTS 4.4.x User Guide

Storage & Snapshots

96