Iscsi lun actions, Iscsi lun status, Iscsi targets – QNAP TVS-472XT 4-Bay NAS Enclosure User Manual
Page 377: Creating an iscsi target

A confirmation message appears.
b. Click OK.
QTS disables the LUN.
4. Click Action, and then select Edit LUN Mapping.
The Edit LUN Mapping window opens.
5. Select Map to iSCSI target.
6. Select an iSCSI target.
7. Optional: Select Enable LUN.
If selected, QTS will enable the LUN after mapping it to the target.
8. Click OK.
iSCSI LUN Actions
LUN Action
Description
Disable
Disable the LUN. The LUN will become inaccessible
to connected iSCSI initiators.
Enable
Enable a disabled LUN.
Modify
Edit the LUN settings.
Delete
Delete the LUN and all data stored on it.
Important
This action is only available if the LUN is
unmapped.
Edit LUN Mapping
Unmap the LUN, or map it to a different iSCSI target
or Fibre Channel Port group.
For details, see the following topics:
•
Mapping a LUN to a Fibre Channel Port Group
•
Mapping a LUN to an iSCSI Target
Show in Storage & Snapshots
Manage the LUN at Storage & Snapshots > Storage
> Storage/Snapshots
LUN Import/Export
Export the LUN to another server, a local NAS folder,
or an external storage device.
For details, see Creating a LUN Export Job.
iSCSI LUN Status
Status
Description
Enabled
The LUN is active and visible to connected initiators.
Disabled
The LUN is inactive and invisible to connected
initiators.
iSCSI Targets
Creating an iSCSI Target
1. Go to iSCSI & Fibre Channel > iSCSI > iSCSI Storage .
QTS 4.4.x User Guide
iSCSI & Fibre Channel
376