QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 346)

• It is not possible to configure, delete, or disable DHCP servers created with USB
QuickAccess.
Enabling USB QuickAccess
1. Go to Control Panel > Network & Virtual Switch .
The Network & Virtual Switch window opens.
2. Go to Network > Interfaces .
3. Go to the USB Quick Access tab.
4.
Click .
Configuring the USB QuickAccess IP address
1. Go to Control Panel > Network & Virtual Switch .
The Network & Virtual Switch window opens.
2. Go to Network > Interfaces .
3. Go to the USB Quick Access tab.
4.
Click .
The Configure window opens.
5. Enter a static IP Address.
6. Click Apply.
Configuring USB QuickAccess Authentication
1. Go to Control Panel > Network & Virtual Switch .
The Network & Virtual Switch window opens.
2. Go to Network > Interfaces .
3. Go to the USB Quick Access tab.
4.
Click .
The Configuration window opens.
5. Select an authentication method:
Authentication Method Description
All NAS Users A QTS username and password is required to access
files.
Everyone No username or password is required to access files.
QTS 4.4.x User Guide
Network & Virtual Switch 345