QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 217)

Field Description
Folder Name Specify a folder name that contains 1 to 64 characters and that does
not:
• Begin or end with a space
• Contain consecutive spaces
• End with "."
• Begin with "_sn_" or "_sn_bk"
• Contain the following characters: " + = / \ : | * ? < > ; [ ] % ` '.
Comment (optional) Specify a comment that contains 1 to 128 ASCII characters.
The information is for your reference and is not used by QTS.
Disk Volume Specify the volume on which the shared folder will be created.
Qtier Auto Tiering When enabled, Qtier performs auto-tiering on data in the folder.
For details, see Qtier .
This setting is only available if you select a Qtier-enabled storage pool.
Tip
You can also enable auto-tiering from the Shared
Folders screen.
Path • Specify path automatically: Creates a new root folder on the
selected volume using the specified shared folder name.
• Enter path manually: Select an existing folder as the root folder.
4. Optional: Configure user access permissions.
a. Under Configure access privileges for users, click Edit.
b. Specify the access permissions for users.
For details, see Shared Folder Permissions .
5. Optional: Enable folder encryption.
a. Under Folder Encryption, click Edit.
b. Select Encryption.
Folder encryption protects folder content against unauthorized data access when the drives are
physically stolen.
c. Specify the following information.
Field/Option Description
Input Password Specify a password that contains 8 to 32 characters except the
following: " $ : = \
This field does not support multibyte characters.
Verify Password The password must match the previously specified password.
QTS 4.4.x User Guide
Privilege Settings 216