QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 340)

Setting Description
Use static IP address Manually assign a static IP address. You must specify
the following information:
• Fixed IP Address
• Subnet Mask
• Default Gateway
Jumbo Frame Jumbo Frames are Ethernet frames that are larger
than 1500 bytes. They are designed to enhance
Ethernet networking throughput, and to reduce CPU
usage when transferring large files. QTS supports
the following MTU sizes:
• 1500 bytes (default)
• 4074 bytes
• 7418 bytes
• 9000 bytes
Important
• All connected network devices must
enable Jumbo Frames and use the
same MTU size.
• Only certain NAS models support
Jumbo Frames.
• Using Jumbo Frames requires a
network speed of 1000 Mbps or
faster.
Network Speed Select the network transfer rate allowed by the
network environment.
Tip
Selecting Auto-negotiation will
automatically detect and set the
transfer rate.
Important
The Network Speed field is
automatically set to Auto-negotiation
and hidden when configuring 10GbE &
40GbE adapters.
5. Click Apply.
Configuring IPv6 Settings
1. Go to Control Panel > Network & Virtual Switch .
The Network & Virtual Switch window opens.
2. Go to Network > Interfaces .
QTS 4.4.x User Guide
Network & Virtual Switch 339