QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 368)

11. Configure the RADVD server settings.
Setting Description
Prefix Specify the routing prefix for the adapter.
Tip
Examine your network setup for
guidance on how to best configure
these settings.
Prefix Length Specify the prefix length for the adapter.
Tip
Obtain the prefix and the prefix length
information from your ISP.
Lease Time Specify the length of time that an IP address is
reserved for a DHCP client. The IP address is made
available to other clients when the lease expires.
Primary DNS Server Specify the DNS server address.
Secondary DNS server Specify the DNS server address.
Important
QNAP recommends specifying at least
one DNS server to allow URL lookups.
12. Click Apply.
Route
This screen controls the creation of static routes. Under normal circumstances, QTS automatically obtains
routing information after it has been configured for Internet access. Static routes are only required in special
circumstances, such as having multiple IP subnets located on your network.
QTS 4.4.x User Guide
Network & Virtual Switch 367