QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 362)

5. Select one or more adapters.
6. Optional: Select Enable the Spanning Tree Protocol.
Tip
Enabling this setting prevents bridge loops.
7. Click Apply.
DHCP Server
This screen controls the creation and management of Dynamic Host Configuration Protocol (DHCP) servers.
DHCP servers can assign IPv4 addresses to clients on the network, while RADVD servers assign IPv6
addresses.
Important
Do not create a new DHCP server if one already exists on the network. Enabling multiple
DHCP servers on the same network can cause IP address conflicts or network access
errors.
Creating a DHCP Server
1. Go to Control Panel > Network & File Services > Network & Virtual Switch .
The Network & Virtual Switch window opens.
2. Go to Network > DHCP Server .
3. Click Add.
The DHCP Server window opens.
4. Select an interface.
QTS 4.4.x User Guide
Network & Virtual Switch 361