QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 365)

Setting Description
Secondary DNS Server Specify a secondary DNS server for the DHCP server.
Important
QNAP recommends specifying at least
one DNS server to allow URL lookups.
WINS Server Specify the WINS server IP address.
Tip
Windows Internet Naming Service
(WINS) converts computer names
(NetBIOS names) to IP addresses,
allowing Windows computers on a
network to easily find and communicate
with each other.
DNS Suffix Specify the DNS suffix.
Tip
The DNS suffix is used for resolving
unqualified or incomplete host names.
TFTP Server Specify the public IP address for the TFTP server.
Tip
QTS supports both PXE and remote
booting of devices.
Boot File Specify location and file name of the TFTP server
boot file.
Tip
QTS supports both PXE and remote
booting of devices.
10. Click Apply.
RADVD
This screen controls the creation and management of Router Advertisement Daemon (RADVD) servers.
This service sends messages required for IPv6 stateless auto-configuration. This service periodically sends
router advertisement (RA) messages to devices on the local network, and can also send a router solicitation
messages when requested from a connected node.
QTS 4.4.x User Guide
Network & Virtual Switch 364