QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 360)

Setting Description
Subnet Mask Specify the subnet mask used to subdivide your IP
address.
Lease Time Specify the length of time that an IP address is
reserved for a DHCP client. The IP address is made
available to other clients when the lease expires.
Default Gateway Specify the IP address of the default gateway for the
DHCP server.
Primary DNS Server Specify a DNS server for the DHCP server.
Secondary DNS Server Specify a secondary DNS server for the DHCP server.
Important
QNAP recommends specifying at least
one DNS server to allow URL lookups.
WINS Server Specify the WINS server IP address.
Tip
Windows Internet Naming Service
(WINS ) converts computer names
(NetBIOS names) to IP addresses,
allowing Windows computers on a
network to easily find and communicate
with each other.
DNS Suffix Specify the DNS suffix.
Tip
The DNS suffix is used for resolving
unqualified or incomplete host names.
TFTP Server Specify the public IP address for the TFTP server.
Tip
QTS supports both PXE and remote
booting of devices
Boot File Specify location and file name of the TFTP server
boot file.
Tip
QTS supports both PXE and remote
booting of devices
11. Click Next.
12. Configure the virtual switch IPv6 address.
Setting Description
Disable Do not assign an IPv6 address.
IPv6 Auto-Configuration (Stateful) The adapter automatically acquires an IPv6 address
and DNS settings from the DHCPv6-enabled server.
Important
This option requires an available
DHCPv6-enabled server on the network.
QTS 4.4.x User Guide
Network & Virtual Switch 359