QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 341)

3.
Identify the adapter that you want to configure and then click > Configure .
The Configure window opens.
4. Go to the IPv6 tab.
5. Configure the IPv6 settings.
Setting Description
Disable Do not assign an IPv6 address.
IPv6 Auto-Configuration (Stateful) The adapter automatically acquires an IPv6 address
and DNS settings from the DHCPv6-enabled server.
Important
This option requires an available
DHCPv6-enabled server on the network.
IPv6 Auto-Configuration (Stateless) The adapter automatically acquires an IPv6 address
and DNS settings from the router.
Important
This option requires an available
IPv6 RA(router advertisement)-enabled
router on the network.
Use static IP address Manually assign a static IP address to the adapter.
You must specify the following information:
• Fixed IP Address
• Prefix length
Tip
Obtain the prefix length information
from your network administrator.
• Default Gateway
6. Click Apply.
DNS
A Domain Name System (DNS) server translates a domain name into an IP address.
Configuring DNS Settings
1. Go to Control Panel > Network & File Services > Network & Virtual Switch .
The Network & Virtual Switch window opens.
2. Go to Network > Interfaces .
3.
Identify the adapter that you want to configure, then click > Configure .
The Configure window opens.
4. Go to the DNS tab.
5. Select one of the following options:
QTS 4.4.x User Guide
Network & Virtual Switch 340