QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 105)

Setting Description User Actions
Alert threshold QTS issues a
warning notification
when the
percentage of used
volume space is
equal to or
above the specified
threshold.
Specify a value.
Encryption QTS encrypts all
data on the volume
with 256-bit AES
encryption.
a. Specify an encryption password containing 8 to 32
characters, with any combination of letters, numbers and
special characters. Spaces are not allowed.
b. Select Save encryption key to save a local copy of
the encryption key on the NAS. This enables QTS to
automatically unlock and mount the encrypted volume
when the NAS starts up. If the encryption key is not saved,
you must specify the encryption password each time the
NAS restarts.
Warning
• Saving the encryption key on the NAS
can result in unauthorized data access
if unauthorized personnel are able to
physically access the NAS.
• If you forget the encryption password, all
data will become inaccessible.
Accelerate
performance with
SSD cache
QTS adds data
from this volume
to the SSD cache
to improve read or
write performance.
No actions
Create a shared
folder on the
volume
QTS automatically
creates the shared
folder when the
volume is ready.
Only the NAS admin
account can access
the new folder.
a. Specify a folder name.
b. Select Create this folder as a snapshot shared folder.
A snapshot shared folder enables faster snapshot creation
and restoration.
15. Click Next.
16. Click Finish.
A confirmation message appears.
17. Click OK.
QTS creates and initializes the volume, and then creates the optional shared folder.
Configuring a RAID Enclosure as an External Storage Device
Important
QTS 4.4.x User Guide
Storage & Snapshots 104