QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 363)

5. Click Next.
6. Select the network environment for the DHCP server.
Option Description
Enable DHCP server on the current network. • The adapter keeps the existing IP address and
subnet mask.
• The DHCP server shares the subnet mask with
the adapter and is assigned the next available IP
address.
Reassign an IP address to the adapter and enable a
DHCP server on a new subnet.
• The adapter is assigned a new IP address and
subnet mask.
• The DHCP server uses a different subnet mask
and IP address.
Enable DHCP server for another subnet. • The adapter keeps the existing IP address and
subnet mask.
• The DHCP server uses a different subnet mask
and IP address.
7. Click Next.
8. Configure a static IP address for the adapter.
Important
A static IP address must be configured when creating a DHCP server.
a. Click Yes.
b. Configure IP address settings.
Setting Description
Fixed IP Address Specify a fixed IP address.
Tip
Examine your network setup for
guidance on how to best configure
these settings.
Subnet Mask Specify the subnet mask used to subdivide your IP
address.
Default Gateway Specify the IP address of the default gateway for the
adapter.
QTS 4.4.x User Guide
Network & Virtual Switch 362