QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 433)

Push Notification Center with a Mobile Device
Before pairing, ensure the following.
• Your NAS is registered to an active myQNAPcloud account.
• Qmanager is installed on the mobile device.
• Your NAS is added in Qmanager.
1. Open Qmanager on the mobile device.
2. Perform one of the following.
Pairing Option User Action
Automatic pairing a. From the device list, tap the NAS you want to pair.
A confirmation message appears.
b. Tap Confirm.
Manual pairing a.
Identify your NAS from the device list, and then tap .
The device settings screen appears.
b. Select Push notifications.
c. Tap Save.
A confirmation message appears.
d. Tap Confirm.
Notification Center pairs with the mobile device.
3. In Notification Center, go to Service Account and Device Pairing > Push Service .
4. Verify that the mobile device appears in the list of paired devices.
Pairing Notification Center with a Web Browser
Before pairing, ensure the following.
• Your device is registered to an active myQNAPcloud account.
• You are using one of the following web browsers: Google Chrome, Internet Explorer, Firefox, or Safari.
1. Go to Service Account and Device Pairing > Push Service .
2. Under Browser, click Pair.
Notification Center pairs with your current browser.
The browser appears in the list of paired devices.
3. Change your browser name.
a. Beside your browser name, click .
b. Specify a browser name.
The field accepts a maximum of 127 ASCII characters.
c. Press ENTER.
QTS 4.4.x User Guide
Notification Center 432