QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 339)

Interfaces
This screen provides access to basic network settings and allows the configuration of physical adapters. This
screen also contains settings related to IPv4, IPv6, DNS, port trunking, VLAN, Thunderbolt, USB QuickAccess,
and Wi-Fi.
IP Address
Configuring IPv4 Settings
1. Go to Control Panel > Network & Virtual Switch .
The Network & Virtual Switch window opens.
2. Go to Network > Interfaces .
3.
Identify the adapter that you want to configure, then click > Configure .
The Configure window opens.
4. Configure the IPv4 settings.
Setting Description
Obtain IP address settings automatically via DHCP If the network supports DHCP, the adapter
automatically obtains the IP address and network
settings.
QTS 4.4.x User Guide
Network & Virtual Switch 338