QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 183)

Option User Action
Manual setting Specify the date and time.
Synchronize with an Internet time server
automatically
Ensure that your NAS is connected to the Internet,
and then specify the following information:
• Server: Name of the Network Time Protocol
(NTP) server
Examples: time.nist.gov, time.windows.com
• Time interval: Number of hours or days
between each time synchronization task
Set the server time the same as your computer
time
Click Update.
5. Click Apply.
Configuring Daylight Saving Time
These settings are available for NAS users in regions that use Daylight Saving Time (DST). Users outside
these regions can disregard these settings.
1. Go to Control Panel > System > General Settings > Daylight Saving Time .
2. Select Adjust system clock automatically for daylight saving time.
3. Optional: Select Enable customized daylight saving time table.
4. Optional: Perform any of the following actions.
Action Steps
Add DST data a. Click Add Daylight Saving Time Data.
The Add Daylight Saving Time Data window appears.
b. Specify a time period and the number of minutes to offset.
c. Click Apply.
Edit DST data a. Select a DST schedule from the table.
b.
Click .
c. Specify a time period and the number of minutes to offset.
d. Click Apply.
Delete DST data a. Select a DST schedule from the table.
b. Click Delete.
c. Click OK.
5. Optional: Select a DST schedule from the table.
6. Click Apply.
QTS 4.4.x User Guide
System Settings 182