QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 382)

Editing an iSCSI LUN Masking Policy
1. Go to iSCSI & Fibre Channel > iSCSI > iSCSI Storage .
2. Click iSCSI ACL.
The iSCSI ACL window opens.
3. Select a policy.
4. Click Edit.
The Modifiy a Policy window opens.
5. Optional: Edit the policy name.
The name must consist of 1 to 32 characters from any of the following groups:
• Letters: a-z, A-Z
• Numbers: 0-9
• Special characters: Hyphen (-), space ( ), underscore (_)
6. Optional: Configure the access permissions for each LUN.
Permission Description
Read Only The iSCSI initiator can read data on the LUN, but
cannot write, modify, or delete data.
Read/Write The iSCSI initiator can read, write, modify, and delete
data on the LUN.
Deny Access The LUN is invisible to the iSCSI initiator.
Tip
Click the values in the columns to change the permissions.
7. Click Apply.
Deleting an iSCSI LUN Masking Policy
1. Go to iSCSI & Fibre Channel > iSCSI > iSCSI Storage .
2. Click iSCSI ACL.
The iSCSI ACL window opens.
3. Select a policy.
4. Click Delete.
A confirmation message appears.
5. Click OK.
iSCSI Target Authorization
Each iSCSI target can be configured either to allow connections from all iSCSI initiators, or to only allow
connections from a list of authorized initiators.
Important
By default, iSCSI target authorization is disabled.
QTS 4.4.x User Guide
iSCSI & Fibre Channel 381