QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 390)

Configuring Fibre Channel LUN Masking
1. Go to iSCSI & Fibre Channel > Fibre Channel > FC Storage .
2. Select a LUN.
Important
The LUN must be disabled.
3. Click LUN Masking.
The LUN Masking window opens.
4. Add one or more initiator WWPNs to the LUN's authorized initiators list.
Method Steps
Add from WWPN list a. Select one or more initiator WWPNs in the
WWPN list.
b. Click Add.
Add WWPNs as text a. Specify one WWPN per line using any of the
following formats:
• XXXXXXXXXXXXXXXX
• XX:XX:XX:XX:XX:XX:XX:XX
b. Click Add.
5. Optional: Select Add unknown WWPNs to the FC WWPN Aliases List.
When selected, QTS will add any unknown WWPNs to the list of known aliases. To view the list, go to
iSCSI & Fibre Channel > Fibre Channel > FC WWPN Aliases .
6. Select Enable LUN.
If selected, QTS will enable the LUN after mapping it to the target.
7. Click OK.
Fibre Channel LUN Actions
LUN Action Description
Edit LUN Mapping Unmap the LUN, or map it to a different iSCSI target
or Fibre Channel Port group.
For details, see the following topics:
• Mapping a LUN to a Fibre Channel Port Group
• Mapping a LUN to an iSCSI Target
Edit LUN Masking LUN masking is an authorization method that
makes a Logical Unit Number (LUN) visible to some
initiators and invisible to other initiators.
For details, see Configuring Fibre Channel LUN
Masking.
Show in Storage & Snapshots Manage the LUN at Storage & Snapshots > Storage
> Storage/Snapshots
Modify Edit the LUN settings.
QTS 4.4.x User Guide
iSCSI & Fibre Channel 389