QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 144)

4. Optional: Unlock the vault.
If the original source volume is encrypted, you must unlock the vault with the volume's encryption
password.
a. Click Unlock.
b. Enter the encryption password or upload the encryption key.
c. Click OK.
5. Select a snapshot.
6. Click Clone.
The Clone Snapshot window opens.
7. Specify a volume alias.
8. Click OK.
QTS clones the volume and shared folders, and then displays a confirmation message.
Cloning a Block-Based LUN from a Snapshot Vault
Important
The time required to create the LUN depends on the amount of data stored on the LUN
and the connection speed between the two NAS devices.
1. Go to Storage & Snapshots > Snapshot Backup > Snapshot Vault .
2. Select a storage pool.
3.
On a vault, click .
The Snapshot Vault window opens.
4. Select a snapshot.
5. Click Clone.
The Clone Snapshot window opens.
6. Specify a LUN name.
7. Optional: Select an iSCSI target.
QTS will map the LUN copy to the target.
8. Click OK.
QTS clones the LUN and then displays a confirmation message.
Cache Acceleration
Cache Acceleration enables you to create an SSD cache to improve the read and write performance of the
NAS.
QTS 4.4.x User Guide
Storage & Snapshots 143