QNAP TVS-472XT 4-Bay NAS Enclosure - Manual (Page 348)

Enabling Wi-Fi
1. Go to Control Panel > Network & Virtual Switch .
The Network & Virtual Switch window opens.
2. Go to Network > Interfaces .
3. Go to the Wi-Fi tab.
4.
Click .
Connecting to a Wireless Network
1. Go to Control Panel > Network & Virtual Switch .
The Network & Virtual Switch window opens.
2. Go to Network > Interfaces .
3. Go to the Wi-Fi tab.
4. Optional: Click Scan to search for accessible networks.
5. Select a wireless network from the list.
Icon Description
The Wi-Fi network requires a password.
Connect to a Wi-Fi network without a password.
• The Wi-Fi connection cannot access the internet.
• The Wi-Fi connection requires an additional
login.
Tip
QTS does not support networks that
require an additional login.
The settings panel expands.
6. Click Connect.
7. Optional: Configure connection settings.
Setting Description
Password Enter the password provided by the network
administrator.
Tip
Click
to make the password visible.
Connect automatically Automatically connect to this network whenever it is
in range.
QTS 4.4.x User Guide
Network & Virtual Switch 347