beautypg.com

Pro printer – Daktronics OmniSport 2000 Timing Console User Manual

Page 95

background image

OmniSport 2000 Pro Swimming Software

77

Pro Printer

The Pro Printer tab (Figure 89) configures the printouts for the printer attached to the
computer running the pro software.


The Printout Format boxes allow the user to set which printouts will be printed and the order
in which they are printed.

Finish by Lane prints the results of the event by lane.

Finish by Place prints the results of the event by place.

Cumulative Splits prints the split times as a cumulative time.

Subtractive Splits prints the split times as single lap times.

All Splits prints the split times.

Finish by Lane and Place prints the results by both Lane and Place.

Finish by Lane w/ Backup prints the results of the event by Lane with backup times.

Finish by Place w/ Backup prints the results of the event by Place with backup times.

Cumulative Splits w/Backup prints the split times as a cumulative time along with
backup times.

Subtractive Splits w/Backup prints the split times as single lap times along with
backup times.

All Splits w/ Backup prints the split times with backup times.

Finish by Lane and Place w/ Backup prints the results by both Lane and Place with
backup times.

Finish by Place w/ Exchanges prints the results of the event by Place and shows the
times of the relay exchanges.

(Page Break) places the following printout on the next page.

(None) means no reports will print.


Type in a descriptive Print Header for the printouts (up to 2 lines). To print the Race Log, select
On. To turn the race log printout off, select Off.

Click OK when finished to save the data, Cancel to exit, or select another tab.

Notes:

1) No event may have more than ten print formats. If all formats are set to None and the

race log is set to Off, reports will not print. Otherwise, all printouts can be sent to the
console printer.

2) The race log can be printed to a full size printer attached to the Pro computer.

Printouts are sent to the computer’s default printer.

Figure 89: Pro Printer Configuration

This manual is related to the following products: